| Forum: LAB: The Classic Live Audio Board |
|---|
| Topic: QSC PLX OUTPUT |
|---|
| QSC PLX OUTPUT [message #352882] |
Wed, 20 August 2008 01:12 |
 |
 Robert Lunceford
Messages: 248
Registered: April 2004 |
Has No Life |
|
|
QSC PLX3402
700wpc @ 8 ohm load
1100 wpc @ 4 ohm load
What would the ouput rating on this amplifier be at a 2.66 ohm load?
How about the current draw at 1/8th power?
|
|
|
| Topic: Providers in Brisbane |
|---|
| Providers in Brisbane [message #352859] |
Tue, 19 August 2008 22:41 |
andy craig
Messages: 100
Registered: April 2004
Location: New Zealand |
Has No Life |
|
|
Have any Aussie Labsters worked with Entertainment Installations in Brisbane?
And was it a good time?
Feel free to PM.
Andy.
andy
|
|
|
| Topic: Long Island LABsters? |
|---|
| Long Island LABsters? [message #352789] |
Tue, 19 August 2008 20:25 |
 |
Robert Caprio
Messages: 148
Registered: December 2007
Location: Long Island, NY |
Has No Life |
|
|
Hey guys,
Anyone here hail from Long Island? Thought it might be cool to arrange a meetup of some kind at a shop or somewhere cool and trade war stories.
Robert "Void" Caprio
Interzone Studios
http://www.myspace.com/voidmix
Push Play Tour Blog
|
|
|
| Topic: Tube Preamp |
|---|
| Tube Preamp [message #352723] |
Tue, 19 August 2008 17:00 |
Johnny Douglas
Messages: 2
Registered: June 2008
Location: Phoenix |
Newbie |
|
|
I have recently purchased a used ART Tube Preamplifier System (The original model, not TPS II). I was hoping I could get some advise on what levels to run mics through this box. Since it is a tube amp do you run the levels the same as you would with a solid state preamp or do you run them hotter pushing the needles more into the red? I have purchased and installed a 12AU7 EH low noise tube in place of the factory tube. Any advice would be appreciated.
Thanks
|
|
|
| Topic: Build a 216MHZ antennae |
|---|
| Build a 216MHZ antennae [message #352295] |
Mon, 18 August 2008 18:11 |
Steve Weiss
Messages: 406
Registered: July 2004
Location: Las Vegas |
Has No Life |
|
|
OK I would like to build a IFB ant. The store bought one we have is a PVC tube 2 inch dia and 18 inch tall. Then a ant on top of that 12 inch. What is in the tube is what we need to know? I have built the pringle can ants before using allthread.
Looks kind of like this
http://www.comtek.com/pra216.html
[Updated on: Mon, 18 August 2008 18:15]
|
|
|
| Topic: Loudness software beta - corp event folks |
|---|
| Loudness software beta - corp event folks [message #350820] |
Thu, 14 August 2008 12:43 |
Iain Macdonald
Messages: 726
Registered: August 2005
Location: UK Europe |
Has No Life |
|
|
Hi,
I came across this free beta software from Orban. It is used to display "loudness". This is not a spl meter. Look at the Technology link for more information. It might be a useful thing to have, if you feed out to TV people from FOH.
http://www.orban.com/meter/
Iain.
|
|
|
| Topic: Optogate / PMR-HH2 |
|---|
| Optogate / PMR-HH2 [message #350492] |
Wed, 13 August 2008 14:31 |
 |
Paul E Fenelon
Messages: 244
Registered: May 2004
Location: Sydney, Australia |
Has No Life |
|
|
Does anyone know if the Sabine PMR-HH2 is available yet. It is supposed to be the Pro version of the PMR-HH1. It is an Optogate type product that has a gate and some kind of AGC/compressor. I used the PMR-HH1 model and it worked quite well but it did colour the sound alot. I mix a band that has seven vocal mics on stage and with backing vocalists on ears they get a lot of bleed. It would also take care of the musos who only sing occassionaly. I believe the pro version is around $149 which could be the answer.
Is anyone a dealer or know if they are available
Thanks as always
Paul
[Updated on: Wed, 13 August 2008 14:32]
I refuse to be a simpsons character. However if you pay me I'll be any character you like.
|
|
|
| Topic: VI6 Version3 beta test software |
|---|
| VI6 Version3 beta test software [message #349901] |
Tue, 12 August 2008 07:19 |
Chris Tate
Messages: 11
Registered: January 2006
Location: Auckland New Zealand |
Here Often |
|
|
Just been mucking around with the Soundcraft VI6 beta version 3 software.
All is good in the version 3 world!!
Automation is now finished but for the cross fade time function...and I have to say is very well laid out and extremely easy to use.
The console can now run 96 inputs from up to 6 stage racks:)
MIDI is now functional and I've run the automation system off time code with great success!
I also like that they have put gain reduction meters below the buss output meters on the master screen....nice touch.
anyone else had a play?
|
|
|
| Topic: New M7cl firmware 1.15, Editor 2.1.2 |
|---|
|
| Topic: My flying fader isn't flying |
|---|
| My flying fader isn't flying [message #347301] |
Mon, 04 August 2008 14:26 |
Silas Pradetto
Messages: 590
Registered: February 2006
Location: CT |
Has No Life |
|
|
I have an RSS M-400 console that I just found out one of the faders is sticking when it goes to move. When pushed up and down with my finger, it feels "sticky" in some spots. When I change layers to have it go full up to full down, it sticks at the top and bottom 1/2" of travel, makes a grinding noise like the motor is trying really hard, and finally gets to its position.
Is there anything I can spray in there or do to fix this, without sending the console in for repair? Nothing has ever been spilled on the console, it's kept in a nice Calzone case, and the fader hasn't been hit or abused in any way. It was working fine at the last show.
Silas Pradetto
Concerts Unlimited LLC
silas@concertsunlimited.com
http://concertsunlimited.com
"Having a tool in your box to clean up stage mud is just as important as having the tool to squish emo screamer boy" - Tom Reid
|
|
|
| Topic: New Forum Behavior |
|---|
| New Forum Behavior [message #345653] |
Tue, 29 July 2008 20:27 |
 |
Mac Kerr
Messages: 6292
Registered: April 2004
Location: Westchester County, NY |
Has No Life |
|
|
As of today there is a 24 hour limit for editing your posts. After 24 hours the edit button will no longer appear. This should be plenty of time to find and change errors, or to clarify what you meant to say. The new behavior will be in all of the Live SR forums.
Mac
[Updated on: Tue, 29 July 2008 21:54]
|
|
|
| Topic: Barry Cases? |
|---|
| Barry Cases? [message #344476] |
Fri, 25 July 2008 14:18 |
Dan Pockrus
Messages: 53
Registered: April 2004
Location: Dallas, Texas |
Should Get Out More |
|
|
I've bought several cases from Barry Cases in St. Louis over the years. I've been e-mailing and calling all week to get quotes for more and can't reach them. Anyone here know what's going on with them?
-- Dan --
|
|
|
| Topic: Acoustics Help |
|---|
|
| Topic: Rational Smaart Training Announced |
|---|
| Rational Smaart Training Announced [message #339873] |
Sat, 12 July 2008 02:28 |
HarryBrillJr.
Messages: 797
Registered: April 2007 |
Has No Life |
|
|
July 29th-31st in Costa Mesa, CA at the Orange County Performing Arts Center
August 26th - 28th in Las Vegas, Nevada at the Live Production Institute (LPI)
September 9th - 11th in Whitinsville, Mass at the EAW Facilities
September 16-18th in Orlando, Florida at Full Sail University
http://www.rationalacoustics.com/pages/Training-calendar
Harry Brill Jr.
"My wife has an effect on the sound...It turns out she has acute phase on the top, a couple of humps in the upper midrange and a nice round bottom end." Roger Nichols
http://www.rationalacoustics.com/
|
|
|
| Topic: Info on MKE 42-2 |
|---|
| Info on MKE 42-2 [message #338122] |
Mon, 07 July 2008 00:06 |
James Rixon
Messages: 1
Registered: July 2008
Location: Brisbane, Australia |
Newbie |
|
|
Hello everyone,
Does anyone have any info on the Sennheiser MKE 42-2?
Cheers
James Rixon
Rixon Audio Design
Can I get some more love in the monitors?
|
|
|
| Topic: old recording Cadacs |
|---|
| old recording Cadacs [message #337532] |
Fri, 04 July 2008 10:03 |
Mark Ray
Messages: 5
Registered: August 2007 |
Newbie |
|
|
Hi Guys.
I know this is a Live forum but ....
This year is Cadac's 40th anniversary, (we're still here while the bank figure a few things out) and so I'm researching the early years for a new Cadac heritage web site. Anyone that has any information or worked in the recording studios back then (1966 onwards) I'd appreciate any stories, news, and/or pictures. Basically from the start when Clive was at Olympic studios, through to desks going into Morgan, Olympic, Lansdowne, Scorpio, Trident, Roundhouse, Townhouse, SARM etc. Which engineers recorded which bands/tracks on the desks, where the desks are now (I've found a few, and will try to do a family tree of owners). Obviously I'm talking to Clive and some of the famous tapeops/engineers/producers from that time.
I have a great picture of John Lydon and Tim Friese-Green sitting at the Cadac in Wessex, and I'm sure Chris has some "interesting" stories to tell including recording Parisienne Walkways.
A Cadac is being installed in the newly refurbished Ronnie Lane Mobile as we speak, more news on that to follow, and later this year we'll have a new product range of the classic and heritage mic pre-amps and EQs.
Any help will be greatly appreciated. Please call or email me.
Many thanks,
Mark
|
|
|
Forum Home
Login
Forum Search
Register
FAQ
