|
| Re: need inexpensive floor stand for 42" LCD [message #346209 is a reply to message #345856 ] |
Thu, 31 July 2008 11:54   |
Don Boone
Messages: 479
Registered: April 2004
Location: SE USA |
Has No Life |
|
|
Good Luck 'Inexpensive' and 'floor stand for 42" LCD' rarely get used in the same sentence.
Even though we're a dealer for all of the major vendors I often go here first to get an overview of all the choices.
http://www.mountsandmore.com/
Don
|
|
|
|
| Re: need inexpensive floor stand for 42" LCD [message #346433 is a reply to message #345856 ] |
Fri, 01 August 2008 00:01 |
 Karl P(eterson)
Messages: 1238
Registered: April 2004
Location: Atlanta, GA |
Has No Life |
|
|
Don is correct that it is really hard to get a cost effective flat panel stand.
That said, we build our own all the time out of 1 1/2" sch 40 metal pipe.
Build an "up, over and down with legs" Frame out of pipe, bolt it to an oversized 3/4" Plywood baseplate, get an omnimount U3-Fixed put it on with some U Bolts, paint the whole thing black and kiss it goodbye.
We sometimes put high quality casters on the base plates if we need to move them around easily, but if we do that we put 75~125 pounds of weight on the base plates to make them sturdier.
We have done similar things with unistrut and even have mounts with full wrap around clamps spaced for 20.5" box truss.
If you need something that is premade, the best look/feature/cost ratio large display stand I can think of is an Ergotron LX Cart http://www.ergodirect.com/product_info.php?products_id=14415
But, I would make one if a simple black stand is all you need.
Karl P
[Updated on: Fri, 01 August 2008 00:02]
|
|
|
|
|
|
|
|
|
| Re: need inexpensive floor stand for 42" LCD [message #373652 is a reply to message #345856 ] |
Thu, 30 October 2008 05:50 |
Bruce Burke
Messages: 80
Registered: April 2004 |
Nothing Better To Do |
|
|
Keyboard stand with a board on top as a platform?
-Bruce
|
|
|
Forum Home
Login
Forum Search
Register
FAQ
